| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: B (Main) |
Length of the box |
| B | Main |
Used In: PH, PH1 (Panels) GFH1 (Gusset Flaps) TPH (Trapezoidal Panel) Using: A (Main) |
Width of the box |
| H | Main | - | Height |
| GLC | Main | - | Correction because of the glue flap |
| UL | Main |
Used In: DFH (Dust Flap) |
Defines if layers should be used |
| LSC | Layers |
Used In: DFH (Dust Flap) TPSR1, TPSR2 (Trapezoidal Panel) |
Layer step crease |
| TLL | Layers |
Used In: TPSR1, TPSR2 (Trapezoidal Panel) |
Layer level of the trapezium |
| PH | Panels |
Used In: GFH1 (Gusset Flaps) Using: B (Main) |
Panel Height |
| PH1 | Panels |
Used In: DFH (Dust Flap) Using: B (Main) |
Panel height |
| TEH | Tuck End |
Used In: DFH (Dust Flap) |
Tuck end height |
| TEC | Tuck End | - | Tuck end correction |
| SLO | Tuck End | - | Slit lock offset |
| SLD | Tuck End | - | Slit lock depth |
| DFH | Dust Flap |
Using: UL (Main) LSC (Layers) PH1 (Panels) TEH (Tuck End) |
Dust flap height |
| Z | Dust Flap |
Used In: SLL (Tuck End) |
Length of lock on dust flap |
| ZZ | Dust Flap | - | Horizontal size of dust flap bevel |
| beta | Dust Flap | - | - |
| DxZY | Dust Flap |
Used In: DyZY, ZX (Dust Flap) |
Horizontal size of dust flap taper |
| DyZY | Dust Flap |
Using: DxZY (Dust Flap) |
Vertical size of dust flap taper |
| ZX | Dust Flap |
Using: DxZY (Dust Flap) |
Horizontal size of dust flap bevel 2 |
| EdgeType | Dust Flap |
Used In: DFC1 (Dust Flap) |
- |
| ExtL | Dust Flap | - | - |
| ChL | Dust Flap | - | - |
| DFC | Dust Flap | - | Dust flap correction |
| DFC1 | Dust Flap |
Used In: DxCh (Dust Flap) Using: EdgeType (Dust Flap) |
Dust flap correction |
| DxCh | Dust Flap |
Using: DFC1 (Dust Flap) |
- |
| SLL | Tuck End |
Using: Z (Dust Flap) |
Slit lock length |
| GFH1 | Gusset Flaps |
Using: B (Main) PH (Panels) |
- |
| FC | Gusset Flaps |
Used In: TPSR1, TPSR2 (Trapezoidal Panel) |
Flap correction |
| TPH | Trapezoidal Panel |
Using: B (Main) |
Trapezium height |
| TPFR1 | Trapezoidal Panel |
Used In: TPFR2 (Trapezoidal Panel) |
- |
| TPFR2 | Trapezoidal Panel |
Using: TPFR1 (Trapezoidal Panel) |
- |
| BAng1 | Trapezoidal Panel |
Used In: BAng2, TPSR1 (Trapezoidal Panel) |
Trapezium bevel angle |
| BAng2 | Trapezoidal Panel |
Used In: TPSR2 (Trapezoidal Panel) Using: BAng1 (Trapezoidal Panel) |
Trapezium bevel angle |
| TPSR1 | Trapezoidal Panel |
Using: LSC, TLL (Layers) FC (Gusset Flaps) BAng1 (Trapezoidal Panel) |
- |
| TPSR2 | Trapezoidal Panel |
Using: LSC, TLL (Layers) FC (Gusset Flaps) BAng2 (Trapezoidal Panel) |
- |
| GL | Glue Flap | - | Glue flap width |
| GLA | Glue Flap | - | Webbed flap angle |